05-03-2017 11:34 AM
I am working on a PoC lab. I have a 7010 controller with a VPN connection over an ISP to a 7220 RAP controller. This is not a branch config. Just a standard VPN configuration both controllers are masters. AOS 22.214.171.124
Behind the RAP controller is my corporate network. I have static routes on the Cisco LAN switches for the VPN controller pointing to the RAP controller. The RAP controller has static routes as well pointing to the VPN tunnel.
I have multiple RAP controllers and I could purchase a secondary ISP connection if needed. I also know I can build multiple VPN connections to different RAP controllers. I am looking for some redundancy and most efficient routing of traffic.
Is there a way for me to setup dynamic routing and failover so I can have at least two VPN tunnels to the remote VPN site? As it stands right now I would have to have the static routes on the Cisco LAN manully moved. Any advice please?
Solved! Go to Solution.
05-03-2017 11:47 AM
In general if you want dynamic routing, you should configure OSPF between those controllers and your infrastructure.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars