Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

VRRP config in 8.4.x

This thread has been viewed 0 times

  • 1.  VRRP config in 8.4.x

    Posted Jul 01, 2019 12:15 PM

    Hello, I need a litte refresher on a basic VRRP config. I have it confiigured on two controllers and have one set as priority 100 and the other with priority 110. The 110 unit is acting as the active controller. Shouldn't it be the 100 unit? My config is very basic, no preemption or tracking set as of now. Thinking that may be my issue. 



  • 2.  RE: VRRP config in 8.4.x
    Best Answer

    EMPLOYEE
    Posted Jul 01, 2019 12:18 PM

    Highest priority wins. In your case, the unit with 110 will be master while it's available.



  • 3.  RE: VRRP config in 8.4.x

    EMPLOYEE
    Posted Jul 01, 2019 12:19 PM

    VRRP reads the highest priority as the master

     

    https://en.wikipedia.org/wiki/Virtual_Router_Redundancy_Protocol