Hello i was wondering what would be the best practice for this? for master/backup model
I normally or all the VRRP i have done are connected to a SWCORE which has multiple modules and normally i connect from one WC to one of the modules of the SW core and i connect from one WC to another module of the switch core, so this way i t doesnt matter if one module fails they will still have access... the whole CORE switch Chassis has to fail in order to not have conectivity
Now let say they dont have a Chassis or anything
And let say the client has 2 different distribution switches ( those switche are not stacked or anything) they are just two swtiches in which both connect separetally to the core switch. The idea is that if one of the switches fail they still have connectivity. If i connect both to the same switch if the switch fails, then no wifi, niether from the master neither from the backup wireless connectroller
As far i understand the VRRP just need to have L2 connectivity so i bealive i can connect one WC to one of the distritubion switch and the other WC to the other distribution switch and it should work with no issue(it doesnt matter if they are on stand alone)
I did read the VRD of redundancy but didnt find anything related to this quetions.
Cheers
Carlos