Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Visual RF Memory allocation and server memory sizing

This thread has been viewed 1 times

  • 1.  Visual RF Memory allocation and server memory sizing

    Posted Mar 26, 2014 06:20 PM

    Hi,

     

    Can someone please advise if the recommended RAM configuration in the server installation guide takes into account Visual RF allocation or should this memory be considered separately.

     

    Eg I've got an AMP 7.7.x server with 250 devices and 8 GB of RAM, I've got about 150 floor plans so VisualRF recommended RAM allocation is 3 GB. Should i therefore alllow for 11 GB or RAM?

     

    Scott



  • 2.  RE: Visual RF Memory allocation and server memory sizing
    Best Answer

    EMPLOYEE
    Posted Mar 27, 2014 11:01 AM

    The server installation guide is based on a number of devices with VisualRF split into floors of 30 APs per floor.  At 150 floors, you're going to want to make sure to provide the additional RAM.  We usually jump from 8GB to 16GB at the next tier.  If you want to get more into details, the number of clients(16 per AP)  and rogues (8 per AP) also factors into the predicted amount.  These were the metrics I had used when I last tested scalability benchmarking.



  • 3.  RE: Visual RF Memory allocation and server memory sizing

    Posted Mar 27, 2014 04:57 PM

    Hi Rob,

     

    Thanks for the (always) helpful response!

     

    Scott