I have 52 205 AP's and have set up 2 ssid's, on on the default VLAN (phs) and another on VLAN 2 (phs_guest)
I have created the identical VLAN's on my cisco switched infrastructure and have truncked the ports where necessary. Ive tested the vlans work by connecting to them with cable. Vlan tagging is enabled to
The issue I have is that a device connecting to the phs_guest ssid only sometimes gets an ip address. I know the vlans on my switches are correct as I can connect with a cable on both vlans and communicate.
Is there something I'm missing?