Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Wave 2 and wave 1 access points same floor

This thread has been viewed 0 times

  • 1.  Wave 2 and wave 1 access points same floor

    Posted Mar 24, 2017 04:15 PM

    Hello

    There isnt any problem if i mix wave 2 and wave 1 acess points

    Ill have 225 and 325 in the same floor mixed.   Is that a possible deployment that wont give any issues?

     

    I ask this because 802.11ac and 802.11n on the same floor was not recommeneded

     

    Cheers

    Carlos



  • 2.  RE: Wave 2 and wave 1 access points same floor

    EMPLOYEE
    Posted Mar 24, 2017 05:11 PM

    That should be fine at this time.



  • 3.  RE: Wave 2 and wave 1 access points same floor

    Posted Mar 24, 2017 05:55 PM
    Hello
    Why do you say at this time? This colud change?? I mean that in the future for se reason it cold not be ok?


  • 4.  RE: Wave 2 and wave 1 access points same floor
    Best Answer

    EMPLOYEE
    Posted Mar 24, 2017 06:16 PM

    If client drivers later on start preferring or weighting W2 APs, then it will matter, but for now that has not really been seen or been an issue so long as proper design guidelines are followed in terms of coverage, AP power, etc. 



  • 5.  RE: Wave 2 and wave 1 access points same floor

    Posted Mar 24, 2017 07:03 PM

    Collin, howard

    Thank you very much!!!!

     

    Cheers

    Carlos