Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Wired devices through the controller and port 5060...

This thread has been viewed 1 times

  • 1.  Wired devices through the controller and port 5060...

    Posted May 01, 2019 09:03 AM

    I have a controller that is essential acting is bot a wireless and wired firewall/gateway. I have wireless and wired clients on the same VLAN. Wireless clients get their respective roles. By default, what role do wired clients get when connecting on the same VLAN (no authentication on wired clients)?

     

    I am having some trouble with some IP phones being provided to us by our ISP. They are dropping on longer call apparently because their keep-alives on port 5060 are not getting back and forth.

     

    On my "external" port I have modified the firewall ACL to allow 5060 tcp/udp but on port scanning the public IP, I am still seeing them as closed.

     

    Any insight is appreciated.

     

     



  • 2.  RE: Wired devices through the controller and port 5060...

    EMPLOYEE
    Posted May 02, 2019 05:05 PM

    that would depend on what role is configured on the wired port. Is there an ACL/role defined there or is the port marked 'trusted'?