Wireless Access

Occasional Contributor II

Wireless controller VRRP to CPPM

We have configured VRRP for master and backup master controllers. We need to integrate CPPM with master now. Do I need to use the VRRP ip-address as the radius client in CPPM? or Do i have to use the real address of the interface?.


Not only CPPM, we need to integrate other services such as logging & NTP. Which ip address do i need to use?

Guru Elite

Re: Wireless controller VRRP to CPPM

You need to use the real address.  VRRP only virtualizes with traffic that is coming into the controller(s), initiated by an external host.  Anything traffic  initiated by the controller will have the controller's ip address.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
Showing results for 
Search instead for 
Did you mean: