Wireless Access

Reply
Highlighted
New Contributor

aruba AP 105 access point deployment

I am new in aruba AP so Don't have any idea about ap 105s

 

I have read here that we can't configure ap 105s without controller

So i want to know that if i configure ap 105s with controller after that can it work with simple poe switch

 

Means i already configure ap 105 from controller like ssid ip address eventhing then i pull out from controller and insert some poe switch wire will it work with that switch with just lan cable with poe.

Highlighted
Guru Elite

Re: aruba AP 105 access point deployment

If the model number on the sticker is an IAP-105 (an Instant AP), you can configure it without a controller.  If the model number says AP-105, it requires a separate hardware controller.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
New Contributor

Re: aruba AP 105 access point deployment

I Know for configuration i need controller

 

I am asking after configuration done and saved like ssid name ip address etc. Then can i used it with any poe switch just inserting wire from poe switch

Highlighted
MVP Guru

Re: aruba AP 105 access point deployment

You will need a controller during the operation. It's not that the controller will push configuration, the AP will need the controller all the time.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: