Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

ask vlan in controller

This thread has been viewed 0 times

  • 1.  ask vlan in controller

    Posted Nov 03, 2014 02:47 AM

    .JPG

     

     

    Dear all  

     

    i have aruba controller with vlan existing 400 and 402 for ap, and i create dhcp server in controller for ap with 172.19.0.1  as default router and i create also vlan 400 and 402 without ip address. the ap get ip address 172.19.0.xx  but why when i create interface vlan 400 and 402 in controller with ip address 172.19.0.2 and 172.22.0.2 suddenly the ap cannot get the ip from dhcp server in controller?



  • 2.  RE: ask vlan in controller

    Posted Nov 03, 2014 06:29 AM

    Does the firewall (named as "Vlan101"?) pass L2 traffic?

     

    Please post relevant configs from the switches/routers/firewalls and the Aruba controller.



  • 3.  RE: ask vlan in controller

    Posted Nov 03, 2014 08:56 PM

    yes there is vlan 101 passing through firewall and i guess everything is fine, the only problem is when i give than  vlan 400 or 402 which is in existing their network my controller suddenly cant connect with ap or cant broadcast the ip address for ap in vlan 400 or 402 but everything is fine if i only create vlan 400 or 402 without ip address. 

     

     

     

    Kindly advise



  • 4.  RE: ask vlan in controller

    Posted Nov 03, 2014 09:11 PM
    Is the port on the controller trusted. Did you recently install your first PEF licence?

    Look under interface config