Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

This thread has been viewed 0 times

  • 1.  can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

    Posted May 15, 2015 03:22 AM

    can you help on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI,if possible with screenshots.Thanks in advance,.



  • 2.  RE: can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

    Posted May 15, 2015 04:53 AM

    Hi Karthik,

     

    Which RAP model you are using ?



  • 3.  RE: can you help me on how to enable/move a rap from 2.4ghz to 5ghz in aurba controller GUI

    Posted May 15, 2015 05:08 AM

    Hi,

    The method is same for any AP. To insist you RAP to use only a-band we need to disable g-radio(in case if the RAP is dual band) as shown in the snapshot and select RF band as "a" in the AP system profile.

     

    for your ref :

    radio1.png

    Radio2.png

     

    Please feel free for any further help needed.