Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

disable an SSID from a particular radio

This thread has been viewed 2 times

  • 1.  disable an SSID from a particular radio

    Posted Oct 17, 2012 10:36 PM

    Hi,

     

    How can I remove an SSID from a specific radio.

     

    Thanks



  • 2.  RE: disable an SSID from a particular radio

    Posted Oct 18, 2012 03:03 AM

    Hello,

     

    Well yes - you can disable a radio in the rf profile for an ap/ap group, but that will in turn effect all the ssid's defined on the specific AP or the AP group.

     

    John

     

     



  • 3.  RE: disable an SSID from a particular radio
    Best Answer

    EMPLOYEE
    Posted Oct 18, 2012 05:54 AM

    MGeorge,

     

    You can do this by creating an AP-Specific Setting:

     

    Configuration> Wireless> AP Configuration> AP Specific.  Click New and Select that AP.  Under the Wireless LAN setting, just remove the Virtual AP that corresponds to that WLAN.

     



  • 4.  RE: disable an SSID from a particular radio

    Posted Dec 09, 2016 10:02 PM

    Hello Colin

    I have been tring to do this in 8.0.1.0 on a 7005 I have had success just the way you explained it in this post for prior editions. This is how I did it. But I cannot find out how to do ths in  version 8.

     

    I did get as far as 1 SSID and only 5g on both AP and second SSID 5g and 2.4 on both AP but I am trying to turn of the 2.4 radio on one of the AP's and I have no luck finding this. 

     

    Thank you in advance.

    Joseph