Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

disconnection device on wifi

This thread has been viewed 6 times

  • 1.  disconnection device on wifi

    Posted May 17, 2018 12:12 PM

    Helllo

    I would like exposed a problem on wifi

     

    i have many device connected on wifi and they obtain a ip by dhcp not on the controller

     

    i have a cluster on controller with 3 ssid and many AP.

     

    so, for a new needed we connected 9 device connected on wifi

     

    so the team contact for  a probleme

     

    this the log output with a debug user and the one device mac

     

    May 17 14:54:31 :501102:  <NOTI> |stm|  Disassoc from sta: XX:XX:XX:XX:XX:XX: AP XX.XXX.XXX.XX-XX:XX:XX:XX:XX:X-AP-XX Reason STA has left and is disassociated
    May 17 14:54:31 :501102:  <NOTI> |AP XX-XX-XX-APX@XX.XX.XXX.XX stm|  Disassoc from sta: XX:XX:XX:XX:XX AP  XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX-AP3 Reason STA has left and is disassociated
    May 17 14:54:31 :522036:  <INFO> |authmgr|  MAC=XX.XX.XX.XX.XX Station DN: BSSID=XX.XX.XX.XX.XXX ESSID=XXXX VLAN=XX AP-name=XX-XX-XXX-AP3
    May 17 14:54:31 :501000:  <DBUG> |AP XX-AP3@XX.XXX.XXX.XX stm|  Station XX.XX.XX.XX.XX Clearing state
    May 17 14:54:31 :522234:  <DBUG> |authmgr|  Setting idle timer for user XX.XX.XX.XX.XX to 300 seconds (idle timeout: 300 ageout: 0).
    May 17 14:54:31 :501105:  <NOTI> |XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX stm|  Deauth from sta: XX.XX.XX.XX.XX: AP XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX-AP73 Reason STA has left and is deauthenticated
    May 17 14:54:31 :522152:  <DBUG> |authmgr|  station free: bssid=XX.XX.XX.XX.XX, @=0x0x10fc823c.
    May 17 14:54:31 :501044:  <NOTI> |AP XX-XX-XXX-AP3@XX.XX.XX.XX stm|  Station XX.XX.XX.XX-XX:XX:XX: No authentication found trying to de-authenticate to BSSID XX.XX.XX.XX-XX:XX:XX: on AP XX:XX:XX:XX-AP3
    May 17 14:54:31 :501000:  <DBUG> |stm|  Station XX.XX.XX.XX-XX:XX:XX: Clearing state
    May 17 14:54:31 :501105:  <NOTI> |stm|  Deauth from sta: XX.XX.XX.XX-XX:XX:XX: AP  XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX-AP3 Reason STA has left and is deauthenticated
    May 17 14:54:31 :501044:  <NOTI> |stm|  Station XX No authentication found trying to de-authenticate to BSSID XX.XX.XX.XX-XX:XX:XX on AP
    May 17 14:54:31 :501109:  <NOTI> |AP XX@XX.XX.XX.XX.XX stm|  Auth request: XX:XX:XX:XX:XXX: AP XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX-AP7 auth_alg 0
    May 17 14:54:31 :501093:  <NOTI> |AP XX@XX.XX.XX.XX.XX  stm|  Auth success: XX:XX:XX:XX:XXX: AP XX.XX.XX.XX-XX:XX:XX:XX:XX-XX-XX-XX-AP7

     

     

    can you tell i there a re a issue to fix it

     

     

    thx pearly



  • 2.  RE: disconnection device on wifi

    EMPLOYEE
    Posted May 17, 2018 12:40 PM

    Those are typical roaming messages.

     

    Tell us more about your network:

     

    Do you have broadcast filtering enabled?



  • 3.  RE: disconnection device on wifi

    Posted Aug 01, 2019 06:33 PM

     i figure out enabling Drop Broadcast and Unknown Multicast