Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

This thread has been viewed 0 times

  • 1.  hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

    Posted Jul 14, 2016 03:37 AM

    now i have 300 APs with one 7210 controller , i want to add 400 AP , 7210 controller and 7030 ?

     

    how can i connect them , and where should i apply the license ?



  • 2.  RE: hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

    Posted Jul 14, 2016 07:59 AM

    Hi!

     

    Do you require controller-redundancy for all your 700 access points?

     

    What is your thought behind the 7030 controller? A branch office somewhere that wants a local controller?

     

    Cheers,



  • 3.  RE: hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

    EMPLOYEE
    Posted Jul 14, 2016 10:14 AM
    Please reach out to your Aruba partner.


  • 4.  RE: hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

    Posted Jul 16, 2016 02:16 PM

    its a big hospital with a lot of buildings , i covered some of them and now i want to cover them all . the customer bought the 7030 for the extra APs above 512 . in this scenario where should i apply the license ?



  • 5.  RE: hello all , i have 3 controllers (7210,7210,7030 ) and i have 700 AP . whats the recommended setup?

    Posted Jul 18, 2016 02:17 AM

    If you are connecting the 7030 as a local controller to the existing Master-local setup you just need to make sure that "centralized licensing" is enabled on the master controller and then apply the AP/PEF/etc.. licenses on whichever controller.

     

    Without knowing your setup it sounds like you perhaps should contact a local Aruba partner just to go throught he setup, I doubt the 7030 is needed.

     

    Cheers,