Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

iAP with guest-ssid, and NAT to new vlan

This thread has been viewed 0 times

  • 1.  iAP with guest-ssid, and NAT to new vlan

    Posted Jul 13, 2017 08:16 AM
      |   view attached

    Hi@all
    (Sorry for my bad english.)

     iAP 225

    Ver. 6.5.3.0_59775

     

    I have the following problem or wanted to ask whether that is at all.


    I would like to build an iAP (as VC) with a guest WLAN. The IP address is to be managed by iAP (Virtual Controller managed).
    This WLAN should however be connected via NAT not in the default VLAN of the AP (default) but in the VLAN 18. The VLAN 18 is located on the iAP per tag.
    Is that possible?
    If i build it so the Traffice is not connected in VLAN 18 but in VLAN 1.
    The VLAN ID in the DHCP scope does not help.

    Which function has the VLAN ID in the local DHCP scope

     

    ​​​​​If i config this way:   IP address per network assigned and  client vlan assignment per default, it works

     

    thank for help and have a nice day



  • 2.  RE: iAP with guest-ssid, and NAT to new vlan

    Posted Dec 14, 2018 02:05 PM

    I also have this question / am wondering if this can be done on an IAP.