Wireless Access

last person joined: 15 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

issue with AP 215

This thread has been viewed 0 times

  • 1.  issue with AP 215

    Posted Nov 17, 2016 05:54 AM

    Hi Guys,

    There is issue with AP. AP is working fine but the problem is, In my desk I tried to connect the AP in my Laptop as well as Phone is not connecting to the nearby AP it’s directly goes to the far located AP. In-between from my desk to far located AP(connected AP) has 2 APs even those APs has not connected to my laptop so it’s result signal problem.

    In my nearby desk peoples has also same problem.

    I tried to use the Dual Band Adapter in my laptop which results the same issue. I have attached all documents with cited for problems. Please post all suggestions ASAP. 



  • 2.  RE: issue with AP 215

    EMPLOYEE
    Posted Nov 17, 2016 07:01 AM

    Your transmit power is too high.  Under RF > ARM change the max transmiit power of the 2.4ghz to 15, instead of max.



  • 3.  RE: issue with AP 215

    Posted Nov 17, 2016 07:33 AM

    hi colin,

     

    after i did this changes now my AP is connecting to nearby or not?



  • 4.  RE: issue with AP 215

    Posted Nov 17, 2016 07:41 AM
      |   view attached

    Hi Colin,

     

    Max transit power is 9 is not max, which one you kept talkin about. Am novice help me. i attached the image plz see or tell me the path of changes.