Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

re-import Controller certificate after a "write erase all"

This thread has been viewed 3 times

  • 1.  re-import Controller certificate after a "write erase all"

    Posted Apr 08, 2018 04:20 PM

    hello Folks, 

    Please, i'm about to "write erase all" a 7010 controller that has a Public certificate used for captive portal, my question here, is it possible to re-import the same installed certificate again on the controller ? 

     

    my second question, i'm about to add another new 7010 controller as a local, is it possible to use the certificate (metionned above) for this second controller ? or i should generate another CRS and ask for a new certificate with same subject name as the master certificate? 

     

    thank you ! 



  • 2.  RE: re-import Controller certificate after a "write erase all"

    EMPLOYEE
    Posted Apr 08, 2018 05:16 PM

    Backup the flash.  The controller's flash would have the certificate in a folder in the flashbackup.



  • 3.  RE: re-import Controller certificate after a "write erase all"

    Posted Apr 08, 2018 05:35 PM
    good to know that, that s mean, i ll need to take it from that backup forlder and import again after erase the controller config, right ?

    what about my second question ?


  • 4.  RE: re-import Controller certificate after a "write erase all"

    EMPLOYEE
    Posted Apr 08, 2018 05:43 PM

    Yes to #1 and #2.



  • 5.  RE: re-import Controller certificate after a "write erase all"

    Posted Apr 08, 2018 05:49 PM
    thank you Joseph,