Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

restrict access on the public interface on the controller.

This thread has been viewed 20 times

  • 1.  restrict access on the public interface on the controller.

    Posted Dec 28, 2013 12:01 PM


    Hi, 

     

    I have a 3400 controller on code 6.1.3.6. This controller has a public interface; I wish to block any traffic from the internet on this interface.  The internal users go out to the internet by source nating. 

     

    I must connect by pptp to the controller to this public interface, and then only I must be able to get on GUI and ssh of the controller. Otherwise all traffic from the outside to the public interface has to be blocked. 

     

    Is it possible to archive it..?

     


    #3400


  • 2.  RE: restrict access on the public interface on the controller.

    EMPLOYEE
    Posted Dec 28, 2013 08:29 PM

    Please see the ip access-list at the bottom of the article here:  http://community.arubanetworks.com/t5/Command-of-the-Day/COTD-Connect-your-Aruba-Controller-to-a-Cable-Modem/m-p/951/highlight/true#M64

     

    Substitute DHCP with whatever inbound protocol(s) you want.