Wireless Access

Occasional Contributor II

show inventory incorrect checksum



When i do a show inventory this is the output:


Supervisor Card slot            : 0
Incorrect checksum in SC manufacturing info

Anyone has remedy for this? Thanks!!!

Re: show inventory incorrect checksum

what slot is the M3 in? If it's not in Slot 0, move it there and try again.

Jerrod Howard
Distinguished Technologist, TME
Occasional Contributor II

Re: show inventory incorrect checksum

Thanks for your reply, the controller model is 3200 there's not slot

*CONFIDENTIALITY NOTE:* The information transmitted, including attachments,
is intended only for the person(s) or entity to which it is addressed and
may contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any action in
reliance upon this information and email by person(s) or entity other than
the intended recipient is prohibited. If you received this in error, please
contact the sender and destroy any copies of the information. Computer
viruses can be transmitted via email. The recipient should check this email
and any attachments for the presence of viruses. The company accepts no
liability for any damage caused by any virus transmitted by this email.
Email transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or incomplete, or contain viruses. The sender and company therefore do not
accept liability for any errors or omissions in the contents of this
message, which arise as a result of email transmission.

Re: show inventory incorrect checksum

Then contact TAC if you have a valid support contract...looks like something got borked. 

Jerrod Howard
Distinguished Technologist, TME
Search Airheads
Showing results for 
Search instead for 
Did you mean: