Wireless Access

last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

show users connected to rap

This thread has been viewed 5 times

  • 1.  show users connected to rap

    Posted Nov 26, 2017 11:09 AM

    Hello!

     

    Is it normal that a users whitch is connected to a RAP is not shown up by the show user command or at the monitoring Page under "Monitoring -> Controller -> Clients"?
    I see RAP users only with airwave.

     

    Is there a way to check rap users at controller side, with a command?

     

    Thank you!

     



  • 2.  RE: show users connected to rap

    EMPLOYEE
    Posted Nov 26, 2017 11:10 AM

    Is it a tunneled, split or bridged SSID?



  • 3.  RE: show users connected to rap

    Posted Nov 26, 2017 11:19 AM

    Hi!

    Thank you for your rapid answear!
    It's a split tunnel SSID.



  • 4.  RE: show users connected to rap

    EMPLOYEE
    Posted Nov 26, 2017 11:44 AM

    If you type "show user-table" on the commandline you should see all clients.  You should also be able to see them in the GUI under controller> clients. Which version of ArubaOS are you running?



  • 5.  RE: show users connected to rap

    Posted Nov 26, 2017 12:14 PM

    I see them neither with "show user-table" nor under GUI.
    The controllers are running under 6.5.4.3.