01-03-2019 06:41 AM
first thanks for help.
here the vap from "show run" :
wlan virtual-ap "ddddd_pppppppp.vap" aaa-profile "dddddd_wpa.aaa" ssid-profile "PPPPPPPPP.ssid" vlan 3090 dynamic-mcast-optimization dynamic-mcast-optimization-thresh 80 !
We try to set "forward-mode tunnel" in the CLI but it never appears , We thinks that it is the default value so that's why we cannont see the line in the conf ?
In other vap conf we see "forward-mode bridge", if they are in bridge mode.
We think that the vlan is already explicitly define in the vap ( and it is as this when we first configure the vap ).
01-30-2019 05:22 AM
we finaly find the solution :
on the wired ap profile
profile ethernet 0 : mode bridge => split-tunnel
at the beginning we think that all the ssid we make were in bridge mode so we made this conf. but when we add tunneled ssid this made this error.