Ok, I will try in tunneled mode first.
Reading ArubaOS6.1user guide it talks about how to tag ports when the forward mode is set to bridge, but what about when the forward mode is set to tunnel or split-tunnel? Does what is specified below out of the User Guide only apply when the forward mode is set to bridge? or not?
"Configure bridging on the Ethernet port
Use the following procedure to configure bridging on the Ethernet port via the WebUI.
1. Navigate to the Configuration > Wireless > AP Configuration > AP Group window.
2. Click the Edit button by the AP group name with the wired ap profile you want to edit.
3. Under the Profiles list, expand the AP menu, then select Wired AP profile. The settings for the
currently selected wired AP profile appear.
You can use a different wired AP profile by selecting a profile from the Wired AP profile drop-down
list.
4. Under Profile Details, do the following:
a. Select the Wired AP enable check box. This option is not selected by default.
b. From the Forward mode drop-down list, select bridge.
c. Optionally, from the Switchport mode drop-down list, select access or trunk. These options only
apply to bridge mode configurations.
Access mode forwards untagged packets received on the port to the controller and they appear on
the configured access mode VLAN. Tagged packets are dropped. All packets received from the
controller and sent via this port are untagged. Define the access mode VLAN in the Access mode
VLAN field.
Trunk mode contains a list of allowed VLANs. Any packet received on the port that is tagged with
an allowed VLAN is forwarded to the controller. Untagged packets are forwarded to the controller
on the configured Native VLAN. Packets received from the controller and sent out the port remain
tagged unless the tag value in the packet is the Native VLAN, in which case the tag is removed.
Define the Native VLAN in the Trunk mode native VLAN field and the other allowed VLANs in
the Trunk mode allowed VLANs field.
d. Optionally, select Trusted to configure this as a trusted port.
5. Click Apply."