Wireless Access

Reply
Contributor I

urgently help Configuration migration From 3200 Controller to 650 Controller

Hello Every one 

 

what is the best way to migrate coniguration from 3200 aruba controller to 650 aruba controller , i think that it by take backup from flash , but what is the best practice to achieve that so that two configuration are identical in two controllers 

 

Best regards, 

Contributor I

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

hiii 

Any Suggestion , what about master / local mode  configuration ???

Guru Elite

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

You can do it two ways:

 

1- Backup and restore:

- Backup the flash on the 650

- copy the flashbackup.tar.gz file off of the 650 controller

- copy the flashbackup.tar.gz file to the 3200 series controller

- execute the backup restore on the 3200 series controller (do not reboot)

- paste in the licenses for the 3200 (you cannot reuse the 650 licenses)

- reboot without saving

- You will still have to console into the 3200 and fix the interface configuration, because the 650 interfaces do not match the 3200 configuration

 

2- You can make the 3200 a local to the 650, but the local configuration like interfaces, dhcp scopes, timezone will not be copied to the 3200 and you would have to configure those manually.  You would have to ensure that the 3200 already has the proper licensing ahead of time, otherwise the unlicensed commands that get pushed from the 650 will be ignored.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Contributor I

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

hiii cjoseph

 

thanks fo your fast response but in your response you reflect the situation i want to copy configuration from 3200 to 650 so in master local method we want to set 3200 as master and 650 as local is that possible ??

 

Best regards ,

Guru Elite

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

No.

 

You need to set the 3200 as a local to the 650 for the global configuration to be copied from the 650 to the 3200.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Highlighted
Contributor I

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

but i want to glabal configuration to be copied from 3200 to 650 

 

Guru Elite

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

I apologize.  I have it completely backwards.  Yes, you need to make the 650 a local to the 3200.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Contributor I

Re: urgently help Configuration migration From 3200 Controller to 650 Controller

hiiii cjoseph 

 

thanks for jentile response 

 

Best regards 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: