Wireless Access

last person joined: 7 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

user guide error

This thread has been viewed 4 times

  • 1.  user guide error

    MVP
    Posted Jun 03, 2014 09:12 AM

    Not exactly community feedback but I haven't got a clue where else to drop this so here it is.. please forward where it needs to go.

     

    The 6.3 User Guide (page 467) still explains Non-Wi-Fi Interference Immunity as having only 5 levels.

    This has been changed waaaaaay back in 6.1.3.2 to have 17 levels.

     

    Might want to get this corrected before 6.4 is released.

     

     



  • 2.  RE: user guide error
    Best Answer

    Posted Jun 03, 2014 10:40 AM

    Thanks Koen.  We'll get this in front of the right people.  

     

    For those not familiar with the setting, it was adjusted from 0-5 to 0-16 starting in version 6.1.3.2.   The 0-5 levels map to the 0-16 levels as shown below; 0-3 have the same effect.   However, keep in mind, this is a setting that you should only use when there is extreme network degredation due to non-wifi interference.  It reduces coverage size and max throughput.   Also, legacy APs (12x and ealier) will only change behavior with levels 0-3 and 13-14.  Consult TAC if you have specific questions.

     

    aos-interference-immunity-mapping.png