Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

vMM can't boot up anymore

This thread has been viewed 0 times

  • 1.  vMM can't boot up anymore

    Posted Jun 20, 2019 08:12 PM

    Hello Team, 

    I have an Aruba virtualized environment running on ESXi vsphere 6.5,

    today i moved 4 VMs (vMM1, vMM2, vMC1,vMC2) from a datastore to another, all VMs booted up after transfer completed except vMM1, 

    it shows the following message 

    "The system is halted, You may turn off power or power cycle"

    2019-06-21_005332.jpg

    any quick resolution? or it needs to be addressed to TAC ?

    hopefully I have vMM2, so i think everything is under control, 



  • 2.  RE: vMM can't boot up anymore

    Posted Jun 20, 2019 08:32 PM

    Do you have three virtual NIC's assinged to that VM?  



  • 3.  RE: vMM can't boot up anymore

    Posted Jun 20, 2019 08:39 PM

    Nop only 1 interface is in use (connected), 

    2019-06-21_013640.jpg



  • 4.  RE: vMM can't boot up anymore
    Best Answer

    EMPLOYEE
    Posted Jun 21, 2019 04:54 AM

    According to the screenshot, you have 4 network adapters assigned if they are connected or not is irrelevant.

     

    Can you try to remove one of your adapters, so it has 3 adapters?



  • 5.  RE: vMM can't boot up anymore

    Posted Jun 21, 2019 06:20 AM
    Hello Herman,
    I removed the 4th interface, and vMM1 is back online right now,

    don't know how this additional interface fits into it. maybe this happened when I was transferring the VM from datastore 1 to 2.

    Thank you, Herman. answrman