Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

via client: assigning multiple pools

This thread has been viewed 3 times

  • 1.  via client: assigning multiple pools

    Posted Dec 13, 2017 08:34 AM

    Hi,

     

    We recently had an increase of Aruba Via usage. The 20 IP addresses from the VIA pool are no longer enough. I have created a second VIA pool, however the addresses are a different block than the first VIA pool. Example:

    VIA pool1 = 192.168.50.1-192.168.50.20

    VIA pool2 = 192.168.50.50-192.168.50.60

     

    The user role for VIA however only lets me assign 1 L2tp pool in the GUI. Is it somehow possible to assisng 2 pools? Perhaps through CLI?



  • 2.  RE: via client: assigning multiple pools
    Best Answer

    EMPLOYEE
    Posted Dec 13, 2017 08:40 AM

    Unfortunately, the user is only assigned the pool in the role.  If you are source-natting traffic or there is a route in your network pointing to the controller for that subnet, you can certainly make it any ip subnet you want and expand it.



  • 3.  RE: via client: assigning multiple pools

    Posted Dec 13, 2017 08:44 AM

    The VPN pools are in the same subnet as the 'normal' plugged-in users at the office, there's not NAT.

    I guess I'll try to free 192.168.50.21 - 192.168.50.30 somehow and expand the pool with that.

    Thanks C