Hi,
I am having 3600 controller with 6.3.1.3 os version . I would like some one to sahre the gui based setps to setup vrrp settings
regards
VRRP can be found under Configuration > Advanced Services > Redundancy:
Hi Tim,
Thanks for your response.
can I have the screen configuration shot steps for both the master and backup controller respectivly.
jayakumar,
Both controllers will be identical except the peer address will be the other controller.
For example:
Master IP = 10.1.1.2
Backup IP = 10.1.1.3
so,
VRRP IP = 10.1.1.1
Master Peer IP = 10.1.1.3
Backup Peer IP = 10.1.1.2
The Campus VRD has the screenshots you are looking for. They are in this section: http://www.arubanetworks.com/vrd/CampusWNetworksVRD/Chap5_Redundancy.html#1030870. It covers both sides of VRRP both CLI and WebUI.
Example from the VRD:
Primary:
Backup:
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.