Wireless Access

Reply
Highlighted
New Contributor

what is the option to associate access point to differen controllers?

Dears,

we have around 30 x AP225 access points associated with two controllers 7205 model (master and local) and all working fine.

currently we purchae new controller to be used for different entity but will utilize the same access points.

my question is how to configure the 30 access points to register to the new controller and keep the current setup not impacted?

Highlighted
Guru Elite

Re: what is the option to associate access point to differen controllers?

You can create a new ap-group that has an AP system profile with an LMS-IP that points to the new controller.  You would then have to reprovision any AP you want to end up on the new controller into that new ap-group.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
New Contributor

Re: what is the option to associate access point to differen controllers?

Thanks so much for you response

I need all access points to associated to both controller concurrently.

please share the document to do so

 

Highlighted
Guru Elite

Re: what is the option to associate access point to differen controllers?

It is not possible in ArubaOS 6.x to associate access points to two different controllers at the same time.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: