08-25-2014 05:22 AM
I was wondering what you guys would use to physically locate and Access point.
Here is the current situation: We have a building (6 floors) with about 70 APs.
All of them are 105 but Airwave and the master controller show that there is a 65. When we refer to the plan and /or the port descroption on the switch , it is supposed to be let\s say at room X, but it is not.
Also note that half of the APs are not visible (hidden in the fake ceiling)
That said we need a tool to find it based on the MAC.
Solved! Go to Solution.