Hi,
from my point of view, this should be possible. AirWave can only monitor CX switches. NetEdit will monitor CX switches and you will be able to do all the configuration stuff as well. Normally, it is not needed to have CX switches in two Management Tools and I would recommend only use NetEdit. But if you have all the rest of your network managed by AirWave it makes sense to have the CX switches there as well. This will give you a complete picture of your network from one management tool.
BR
Florian
------------------------------
Florian Baaske
------------------------------
Original Message:
Sent: Jan 04, 2021 11:44 AM
From: Edgar Moreno
Subject: Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3
Can 6300M switches be monitored on NetEdit and Airwave at the same time?
In my 6300M switches we have version FL.10.06.0001
Regards.
------------------------------
Edgar Moreno
Original Message:
Sent: Oct 09, 2020 04:18 AM
From: Alexis La Goutte
Subject: Add switch OS-CX (6000 series) to Airwave with AMON or SNMPv3
You need now to configure AirWave and add device with SNMP info