Hello,I am a Bit desperate.I got two 387.Mesh Point should create a Uplink for a Switch through 6g.Switches on both sides are 5130 with Trunk Configuration on the AP uplinks.
A few Minute it Worked...But now:
On both sides I can reach the APs through IP.But only the 5Ghz Channel is established.And I am unable to ping Mesh Point through Portal and vise versa.No 60Ghz and no traffic. Regardless What I Do and how often I reboot.
I played around with native vlan (because read a out issues with that).What could be my Problem?How should I ise "Management vlan id" and Whats the beste Switch Port config (Trunk with native or Hybrid with untagged Management vlan)
I used 8.7 and know have 8.7
Does not affect the Problem.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.