Community Feedback

 View Only
last person joined: 2 days ago 

How is the community doing? Do you have any questions or feedback related for the Airheads Community team? This is the place to let us know.
Expand all | Collapse all

NTP conf - Switch 5406R zl2 J9850A

This thread has been viewed 11 times
  • 1.  NTP conf - Switch 5406R zl2 J9850A

    Posted 30 days ago
    Dear All,

    I have a couple of Switch 5406R zl2 J9850A that are acting as my core-switches.
    They are in sync with my NTP SERVER (a Windows Server) and it's working fine.

    On this switch i have configurated all the VLAN, and all the VLAN have ad ip address assigned since this core switch is also the default gateway for all the clients, servers and device in general in every vlan.

    Is it possibile to configure this switches as NTP SERVER (acting as a relay) so that each vlan has its own NTP server for sync time pointing at its GW without need of routing?

    This is actual configuration:
    ntp unicast
    ntp server 192.168.X.Y
    ntp enable
    time daylight-time-rule western-europe
    time timezone 60

    Thanks,
    Davide

    ------------------------------
    Davide
    ------------------------------


  • 2.  RE: NTP conf - Switch 5406R zl2 J9850A

    Posted 30 days ago
    See this post: https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=23036

    ------------------------------
    Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------



  • 3.  RE: NTP conf - Switch 5406R zl2 J9850A

    Posted 29 days ago
    Hi Davide

    No, it is not possible unfortunately.

    ------------------------------
    Shpat
    ------------------------------