The field is too short (18 caracters?) with this command and don't show the full description, in reality it is not really usable and you have to show run the interface to see the full description ..
1/1/48 1 trunk 1GbT yes up 1000 --- Uplink sw-gri-...
1/1/49 999 access -- no down No XCVR installed -- --- LIBRE UPLINK/V...
1/1/50 999 access -- no down No XCVR installed -- --- LIBRE UPLINK/V...
1/1/51 1 trunk SFP+SR yes down Waiting for link -- --- Uplink sw-gri-...
1/1/52 1 access SFP+SR yes down Waiting for link -- --- Uplink sw-gri-...
vlan1 -- -- yes up -- --- VLAN ADMIN ---
------------------------------
Laurent from France - Network Engineer
------------------------------
Original Message:
Sent: Dec 03, 2021 04:37 AM
From: Arne Opdal
Subject: AOS-CX 10.09 Update
@Whitehawk29FR
This is kind of useful if you want to look at the interfaces and description:
arubacx1# show interface brief --------------------------------------------------------------------------------------------------------------Port Native Mode Type Enabled Status Reason Speed Description VLAN (Mb/s) --------------------------------------------------------------------------------------------------------------1/1/1 1 trunk -- yes up 1000 Interface 11/1/2 1 access -- yes up 1000 Interface 21/1/3 1 trunk -- yes up 1000 Interface 31/1/4 -- routed -- no down Administratively down -- Interface 41/1/5 -- routed -- no down Administratively down -- --
------------------------------
Arne Opdal
Original Message:
Sent: Dec 03, 2021 03:57 AM
From: Laurent Tygreat
Subject: AOS-CX 10.09 Update
Thanks for info.
Still waiting for basic command "show interfaces description" .. :)
------------------------------
Laurent from France - Network Engineer
Original Message:
Sent: Dec 02, 2021 01:24 PM
From: Justin Noonan
Subject: AOS-CX 10.09 Update
AOS-CX 10.09 Deep Dive Presentations
Find the session recordings on YouTube Airheads Broadcasting Channel: AOS-CX 10.09 Update Playlist
------------------------------
Justin Noonan
------------------------------