Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

[Tutorial] Wireless mesh with Instant 8.9

This thread has been viewed 128 times

  • 1.  [Tutorial] Wireless mesh with Instant 8.9

    EMPLOYEE
    Posted Jan 16, 2022 08:51 PM
      |   view attached

    Aruba Instant APs (IAP) uses Wi-Fi mesh technology to extend Wi-Fi coverage for outdoor/ indoor environments. This is a short demo guide (25 pages) for demonstrating the new mesh enhancements that provide much better control over the mesh cluster operation and selection

    Here are the new enhancements.

    • Role Assignment enhancement for Mesh point
    • Support for more than one mesh cluster for IAP swarm and manually configure mesh clusters and assign it to specific IAPs
    • Mesh cluster support for fast moving environments with fast roaming

     

    We'll three scenarios, showing the configuration steps for setting up

    1. Mesh link with the default mesh cluster and enabling E0 bridging.
    2. Manual mesh cluster for a specific Mesh portal/point with E0 bridging.
    3. Manual mesh cluster for a specific Mesh portal/point with E0 bridging and backup mesh cluster.

     

    Hope you'll find it useful and as always please send through your feedback to improve it.



    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Attachment(s)

    pdf
    Mesh Instant 8.9- v0.2.pdf   929 KB 1 version