Become a Member
Hello all I am a novice to switches but I know the basics. I am trying to setup my switch to allow my IP phone to connect to my Voice network VLAN 30 and my PC to connect to the same port via the PC port on my IP phone VLAN 1. I have setup my VLAN’s and the access port has VLAN 1 untagged...
Hi all, I am having this situation and I don´t know if it have sense. In HP 8206zl switch I have one VLAN (between others) like this: vlan 50 ip address 192.168.50.1 255.255.255.0 untagged ethernet A1 exit *Interface A1 has no ethernet connected. It is empty. If I...
Bonjour, Je dois configurer sur un switch HPE 1920 un port "Vlan 10" Wifi pour le diviser de mon Lan "Vlan 1", malheureusement il ne me reste plus d'interface physique sur mon Firewall donc je dois créer un "Vlan 10" Wifi dans mon firewall et le coller sur mon interface physique Lan. ...
thank you for your response, i add the 8021q to my endpoint devices, by executing this command: modprobe 8021q and i added virtual interfaces to my endpoint devices eth2:3 & eth2:4 by the command : vconfig add eth2 3 # for vlan 3 with x.x.x.23 vconfig add eth2 4 # for vlan 4 with x...
Hi i am setting up a simple v lan and i am unsure weather the ports for the v lan should be tagged or not. I have created VLAN2 which ports 1-5 are assigned to. in ports 1 - 5 i will be patching in up to 5 wifi access points. these access points support multiple SSID so...