Become a Member
I have a MSR 1003-8 that is routing between a public IP on the WAN ethernet 0/0 (e.g. 140.140.8.12) and a public IP range on the LAN ports (e.g. 140.140.9.0/24) - different subnets. I have traffic going in and out ok. I would like to block all traffic coming in and then to open one incoming...
Hey, I've bought a used HP MSR930 JG511A for home use. I've set everything up, just a basic setup, NAT, WAN, LAN and a couple of VLANS. But now here's the first issue. I have a 1Gbps network plan, and speedests are only showing ~600Mbps Download/Upload, while my old crappy Technicolor router...
Hi guys, I am facing an issue in HP MSR 2000 and 3000 model routers. I am having SIC-4SAE serial interfaces to connect my WAN links. but many times, i was forced to toggle between the "invert transmit-clock and invert receive-clock " commands in the serial interface, to avoid wan link failure...
I've been building WAN mesh networks with ospf and IPSEC for some time using linux as a backbone. This is tedious and time consuming, but it works very well. This here Aruba 3810m appears to have some IPSEC functionality built into it. I would like to understand what is possible in this regard....
Hoping this is the correct forum. sysadmin here trying to do the work of a departed network admin. ISP brought a fiber connection into a new building. Their equipment terminates in an ethernet jack that is part of a X.X.10.144/30 network. They have a X.X.52.184/29 trunked through...