Become a Member
Hi, I'm very new to HPE networking, and recently we have purchased HPE Aruba 2930F JL255A network switch. We would like to configured it as network default gateway instead of using firewall IP as default gateway. I did some research and most common method is configure ip route 0.0.0.0/0 ....
Some machines does not receiving LAN or internet. I'm getting general ping failure. I'm plugged directly in the switch and everything is working. Please, help me. Edit#1: I activate the dhcp relay on some switches which was not active and powered on the spanning tree protocol with the core...
Thank you for the reply. In the link aggregation status all Baggs created show running as normal, without any advice. All Baggs was created as static. The Wireshark capture shows a lot of broadcast traffic when the machine is on the restart process. Another way to create a bagg is a dynamic bagg...
I fix this checking all switches and all ports. Configuring each port that was misconfigured as an example, printer ports was as a trunk not access port. Checking the ports that need to be in access mode and checking the ports that has an access point attached to (in my case, a Cisco AP that...