Become a Member
Hello , We recently bought hp switch to our environment and i was tasked by my manager to configure 2 vlans with one trunking port to allow the multiple vlans. As I am coming form cisco world , i found the commands i know dont suite the hp CLI... Can someone help me with the configuration...
Hello all I am a novice to switches but I know the basics. I am trying to setup my switch to allow my IP phone to connect to my Voice network VLAN 30 and my PC to connect to the same port via the PC port on my IP phone VLAN 1. I have setup my VLAN’s and the access port has VLAN 1 untagged...
Bonjour, Je dois configurer sur un switch HPE 1920 un port "Vlan 10" Wifi pour le diviser de mon Lan "Vlan 1", malheureusement il ne me reste plus d'interface physique sur mon Firewall donc je dois créer un "Vlan 10" Wifi dans mon firewall et le coller sur mon interface physique Lan. ...
thank you for your response, i add the 8021q to my endpoint devices, by executing this command: modprobe 8021q and i added virtual interfaces to my endpoint devices eth2:3 & eth2:4 by the command : vconfig add eth2 3 # for vlan 3 with x.x.x.23 vconfig add eth2 4 # for vlan 4 with x...
The step you've missed is this: you then need to "connect" VLAN4 between all your switches. On each "Access" switch where you have VLAN4, add VLAN4 as "tagged" to that switch's uplink port. Then, at the other end of that link, add VLAN4 to the switch it is connecting to, and add VLAN4 ...