Become a Member
Hi all, So I am new to HP networking (and networking in general), and I have been landed with a pile of hardware to congigure. I have the following kit: 4 x DL385G7 ESXi 5.5 hosts 1 x c7000 chassis with 16 x BL460C ESXi 5.5 hosts 1GB network: 2 seperate 2920 stacks for 1GB storage and...
Some machines does not receiving LAN or internet. I'm getting general ping failure. I'm plugged directly in the switch and everything is working. Please, help me. Edit#1: I activate the dhcp relay on some switches which was not active and powered on the spanning tree protocol with the core...
Thank you for the reply. In the link aggregation status all Baggs created show running as normal, without any advice. All Baggs was created as static. The Wireshark capture shows a lot of broadcast traffic when the machine is on the restart process. Another way to create a bagg is a dynamic bagg...
Hi folks. Good morning. I'm here to ask a question about the STP functioning. I have the following topology: 1 HP 5500 HI 48G as the core switch. (RSTP enable, BPDU guard enable) 7 HP 1910 48G (STP are disable on all switches. 5 of this 1910 are connected through a BAGG (fibre) of 2 Gb...
I fix this checking all switches and all ports. Configuring each port that was misconfigured as an example, printer ports was as a trunk not access port. Checking the ports that need to be in access mode and checking the ports that has an access point attached to (in my case, a Cisco AP that...
Hi, I am doing a lab scenario with two 2610-24 switches before implementing in production. The test case is to create a trunk between SW-01 and SW-02 using three ports. I have upgraded both switches to the latest firmware i could find (#R.11.63), and the configuration has been...