Controllerless Networks

Reply
Highlighted
Contributor I

IAP 207 rebooting

Hi

 

Any ideas on the below please?

not sure what else to check?

 

Scenario:

Edge switches - 2530 POE+ 48 ports x9

Core switches - 5406R x1

IAP - 207 x51

firmware: 8.5.0.0

Management - Aruba Central

 

Issue:

IAP are randomly rebooting across various switches

reboot reason - AP rebooted caused by cold HW reset(power loss)

 

checked: - Please see attached

PoE usage on the switch

   - lots in reserve

 

PoE delivering on the ports

   - delivering as requested by IAP

 

Switch is not rebooting

 

Cabling guy says his runs are all less that 100meter

and this cables are all good

 

Log on the switch did show this message:

11/14/19 09:58:42 00563 ports: port 2 PD MPS Absent indication.

cant find to much information on this other than the device lost power

 

Thank you

 


Accepted Solutions
Highlighted

Re: IAP 207 rebooting

perhaps try a cable test on the switch just to make sure.

Screen Shot 2019-11-19 at 11.41.11 am.png

 

ACCX#1050 ACMP CWDP CWSP

View solution in original post


All Replies
Highlighted

Re: IAP 207 rebooting

perhaps try a cable test on the switch just to make sure.

Screen Shot 2019-11-19 at 11.41.11 am.png

 

ACCX#1050 ACMP CWDP CWSP

View solution in original post

Highlighted
Contributor I

Re: IAP 207 rebooting

 Hi Matthew

 

Thank you, will give that go.

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: