Become a Member
The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.hpe.com for current and complete HPE Aruba Networking product lines and names.
This is a really old post. Software can be found on the HPE Networking support portal. Link to the 2824 software download. ...
In the meantime some more ComwareOS 9 based switches (HPE 5550 HI, 5150 HI) have arrived. What about IMC 9.0? Within HPE Networking ...
Hello, I have a switch HP A3100-24G EI v2 (JE074A), currently running Comware 5.20.99 Release 5213P03. Unfortunately, SSH is ...
Try adding the following, that should allow for you to fail to local account. aaa authentication allow-fail-through
This is not the right forum for CX switch questions. This one is for Comware. However, lets try to answer your question. Does ...
Hi @ezrat Thx for posting your solution. This is very strange behavior you encounter. Here is part from documentation ...
If you would like for the fans to go back to normal before having to flash the switch use the command below; [HP] fan prefer-direction ...
I've run into a similar situation when setting up multiple HP-UX servers through a single console. What worked for me was using ...
The switch port the new DHCP server nic is on should NOT have tagged vlan's on it. it should only be an access vlan. The IP ...
Hi, so the: Port 1- no ip assigned port 1 (sub1) - 172.16.0.0/24 (vlan 7) port 1 (sub2) - 172.16.1.0/24 (vlan 8) scenario ...
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.