Become a Member
I'm (re-)configuring a ProCurve 2910al-48G-PoE+ (J9148A). I'm fairly new to this kind of stuff, and although I thought I had a reasonable understanding of routing etc. I can't seem to make the switch work the way I want. Here's the situation: I'm using the 2910al as a switch/router that's...
I have a simple setup for testing purposes, which, when working, will be implemented at a busy animation studio. HP 2910al-48G switch (will be connected to linux server via 10Gbe-CX4 backplane). 2x Windows 7 PCs equipped with HP NC382t dual NICs, bonded using HP Network...
Hi Am still a bit confused with the staging of both switches Config: There are 2 VLAN's per switch. Two switches in total. (sw1 & sw2) Default VLAN Data VLAN Software revision: W1470 Servers are connected to the both switches in the data VLAN. Two ports have...
Hi, when i shutdown the switch to change, when i turned it on the configurations are away no vlans, no ip nothing (factory default) i had to config the switch for a second time, i have to change the place of 6 switches, is'nt there any way to make the switch to save its configuration? ...
Hi Everyone, I am new to procurve switches and have been tasked to setup a SAN fabric. Currently have to 2910al switches. Have created a VLAN for the SAN and enabled flow-control and Jumbo frames for the SAN. Config So Far VLAN 1 - Management VLAN IP...