Become a Member
Is the port for the IP-TV setup as tunnel or bridge? If it's tunnel, the traffic is sent all the way to the controller. When it's bridged, the traffic is as if the RAP is transparent and it gets dumped locally to the switch. -- Michael Haring --
Is the enet2 port configured as tunnel or bridge? -- Michael Haring --
Hi anyone can help me to configure VLAN bridge to AP-303H eth2 from switch i will explain my situation I have WLC MM with AP-303h . I have to connect my IP-Phone to AP eth2 but the VLAN should be bridge from Switch. As of now the VLAN taken through WLC for IP-Phone , i don't want this...
DIAGRAM-3.png
HI Anyone can help me to do the recommended configuration for IP-TV system to work with AP-303H.I just created IP-TV Vlan and wired AP profile in WLC then attached to eth2 profile. now the port is under IP-TV VLAN ( its getting IP for TV NW ) . But my TV is not work Well , its getting stuck...
DIAGRAM-NP.png
Hello, We're experiencing DHCP renew issues with a new batch AP-303H AP's. The AP's are configurerd as Remote AP's to connect with the controller in the main office (Aruba 7005). Upon boot the AP-303H has no problems retrieving IP address from local DHCP server (Palo Alto), but the issue...
9397589F-781B-42CB-984F-A68F2C52DF61-2-AP-303H DHCP problems.txt
Hi, We have an AP303H that's having what appear to be CPSec issues. We are seeing it reboot over and over. Controller is running 6.5.3.3-FIPS. Have tried factory resetting the AP. The error log shows: Jul 22 16:03:02 |AP @ sapd| An internal system error...