Become a Member
While building QoS mechanisms between MSR2000/3000 routers, I create a mirror port to monitor the router link port with Wireshark to verify proper DSCP marking, policing, etc. Most traffic is displayed with the correct marking. Using an advanced ACL, we mark inbound and outbound system...
Hi all, I have a requirement to configure QoS on Procurve 2524 and 1920 Switches für VoIP. On Edge Ports there are Cisco IP Phones connected. On each IP Phone Switche there is on PC Connected I need to make sure that voice data and signalling traffic is keeps it marking while data traffic...
I posted this in another HP forum and I was told I should probably post here http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/1810-v2-qos-DSCP/m-p/5146431/highlight/false#M20484 I've got an HP Procurve 1810-24g v2. According to the documentation it supports...
Hi, I have 1 HP2910al-24G and 4 HP 2620's and I have the need to run QoS due to the Voice traffic on the network. All the 2620's uplink to the 2910. I know there are a lot of QoS options but it's quite confusing. We have hard phones that connect to the switch (and the PC's...
I have a HP Procurve 2610-48-pwr device at each of my locations with software version R.11.44. I have a HP Procurve 5412zl at my main location with software K.12.57. Old software for both I know. I am trying to implement dscp tagged packets in all directions of my traffic so traffic is routed to...