Become a Member
Hello, I have been presented with a configuration that I believe is incorrect, and am seeking guidance to confirm or reject my suspicion. I've always been of the opinion that switch port uplinks to other switches, router, and firewalls should be Trunk (I come from a Cisco background)....
I'm (re-)configuring a ProCurve 2910al-48G-PoE+ (J9148A). I'm fairly new to this kind of stuff, and although I thought I had a reasonable understanding of routing etc. I can't seem to make the switch work the way I want. Here's the situation: I'm using the 2910al as a switch/router that's...
Hello, I have a doubt regarding IRF configuration. My scenario is the following: We have a stack of 2 5700's switches in daisy chain topology, we plan to change this switches by creating a stack of 3, disconnect one of the switches and again, add the last switch. Then, we will replace...
Hello all I'm looking for a bit of advise. Please see the attached network topology, I'm looking for opinions on the best configuration based on performance and security. I welcome any suggestions that the experts on the forum can provide to assist with this config. I would also welcome...
6938890_Lab2.png
Hi, i have to set up DT between 2 5406zl and one 5308. I read the documentation of the last version K15.16 but some point are not clear. From doc : for the keepalive link STP must be disable, what about the ISC link as the customer run RSTP on all ports/all switchs ? From...