Become a Member
Hi, For my WAN connection, I have 2 routers 6200 (J8992A) , with a gigabit/s WAN connection for each router , both routers learn by OSPF area 249 routes from others router(from the others site). I want to you use the full capacity of my 2 Wan connections. From the LAN site the router are...
While building QoS mechanisms between MSR2000/3000 routers, I create a mirror port to monitor the router link port with Wireshark to verify proper DSCP marking, policing, etc. Most traffic is displayed with the correct marking. Using an advanced ACL, we mark inbound and outbound system...
Good morning, all! Configuration is two sites (A & B), each joined with a dediated WAN link for inter-office traffic *and* redundant backup in event one site loses internet connectivity (all traffic fails over to other site); each site has its own dedicated internet WAN that is used except in...
7002117_ospf-routing.PNG
Hi All, Recently purchased a HPE 5510 24G 4SFP+ and been playing around with the featureset (very much used to Cisco and Aruba/HP CLI :( ). I cannot seem to locate 'distance' in the OSPF command set on the switch or locate it at all in the IP L3 referencing document. For example on my...
I've been building WAN mesh networks with ospf and IPSEC for some time using linux as a backbone. This is tedious and time consuming, but it works very well. This here Aruba 3810m appears to have some IPSEC functionality built into it. I would like to understand what is possible in this regard....