Become a Member
Hi guys, I am facing an issue in HP MSR 2000 and 3000 model routers. I am having SIC-4SAE serial interfaces to connect my WAN links. but many times, i was forced to toggle between the "invert transmit-clock and invert receive-clock " commands in the serial interface, to avoid wan link failure...
Hello everyone, I've got my hands on a 3COM 4500 26 port switch from 2006, and have been feverishly reading forums online and its documentations to figure out how to properly configure VLANs on this switch via putty command line (serial connection). VLAN 1 is "Default" and no ports can be...
I ran into (and solved) a problem today which has been bugging me for a while. I've found that some of the newer ProCurve switches will display output on the console when connected to a Linux box using minicom, but would not accept input. When booting the switch with the serial port set to 9600...
I know that the console cable for a brocade 3800 is a db9 with only txd, rxd, and gnd (txd on one end connected to rxd on the other and vice versa). What about the 2800? I put a db9 connector with a flat ribbon cable to a 10pin connector (matching pin to pin) on the console port in the 2800 and...