Search

Discussion Post

HP 5406zl Minor Update to Firmware K.16.02.0030 is suddenly Unsuccessful and causes Switch Boot Hang

Hello "Expert Day" Online HPE Experts! Have been keeping 5400 and 3500 series switches software up to date without any problems for years - including several BootROM updates - until just now. Routinely applied K.16.02.0030 to Primary Software Image location on a HPE 5406zl and issued...

Discussion Thread 9

HP 5406zl Minor Update to Firmware K.16.02.0030 is suddenly Unsuccessful and causes Switch Boot Hang

Discussion Post

HP 1950 and Procurve 5406zl

Good afternoon, colleagues! I have a small part of the network that operates HP 1950- cisco 2960-hp procure 5406zl. ports have the following settings: hp 1950 interface GigabitEthernet1 / 0/3 port link-type trunk port trunk permit vlan all cisco 2960 interface GigabitEthernet1 / 0/5 ...

Discussion Thread 8

HP 1950 and Procurve 5406zl

Discussion Post

Change IP Multicast PIM-Sparse Neighbor

Hello, Thank you for any help with this. How do you change the Neighbor IP address on a VLAN? #ip pim-sparse ip-addr any | 192.168.3.254 ??? Many thanks! HH #K.16.16.0021 #5406zl

Discussion Thread 1

Change IP Multicast PIM-Sparse Neighbor

Discussion Reply

RE: Amber DIMM LED & Slot B Unrecoverable fault on PoE controller

OK, I have a fault indicator LED flashing in amber now, but the standard log -r does not show anything related to PoE. Any ideas or should I open a new ticket with the helpdesk? Many thanks, Pipboy-2000 #5406zl

Discussion Thread 6

Amber DIMM LED & Slot B Unrecoverable fault on PoE controller

Discussion Thread 3

Can't graph VLAN traffic on Switch E5406zl

Discussion Post

Can't graph VLAN traffic on Switch E5406zl

Hello. I've googling and searched in this forum and have no solution. Is there a way to graph traffic per VLAN on E5406zl ? I use Cacti where it's work to graph per Interface but not work per VLAN. Thx in advance. Regards, Ranto #VLAN #5406zl