Become a Member
I know this post is old, but it worked! Immediately after I issued the command "ip-mode v4-prefer", my iPhone on iOS 15.1 was recognized by macOS 12.0.1. (When I tried ipv6 enable, Aruba said no joy (parse error.)) Thank you, internet strangers!! IT WORKS -- Peter Reilly --
Hi - Are there other options other than consoling directly into an AP225 to purge and factory reset the device? Example: Have a wap 225 at a remote location that would occasionally go up and down. Replaced it with a spare and things are good. Factory reset the bad wap via console and it's...
Hi everyone, we are facing issues here on AP225 wired port after upgrading to AOS 6.4.4.10 from 6.4.2.6. All AP's where fine from 6.4.2.6 we have 135/134, 124 and 225 until we upgrade to 6.4.4.10 the suddenly all AP225 wired port goes down as per investigation after the came up for a min up then...
I recently found an Aruba AP-225 at a garage sale. I was told they have to be "Authorized". by Aruba in order to work. Is there anyway to get it to work without this registrtion/authorization process just for home use? #AP225
Hi all, Is it possible to have some users connect to 5 Ghz per ssid? we have huge environment of mixed users of 2.4 and 5 GHz, we need the top manegment to always connect to 5GHZ on a specific ssid and the rest can connect to either 2.4 or 5 GHz. I dont want to use the option ...
Hi there, So - I have a 3200XM Controller, and an AP-225 AP. A few months ago, I was trying to get them set up - and was able to get the image installed on both the controller, and the AP - 6.3.1.0. Unfortunately, I didn't have any licenses, and when I got the licenses in, I realized...