Become a Member
Hi, I have a bit of a dilemma, and not sure why it's happening. I have created a new vlan on an access switch(Procurve), that is connected to a core switch that is connected to a firewall. When I connected a system(server) to a port and assign it the new vlan on the access switch, the system...
Hi, I need to design a network which will be used by three systems: BMS, CFTV and Access Control. I did a fast survey and there will be almost one hundred of cameras, fifty ACS controllers and twenty BMS devices (sensors, actuars, controllers). As far as I know, this could be considered a...
We have the HPE OfficeConnect 1920S Series model JL 385A switch with a fiber optic transceiver module inlcuded. I need to move the fiber module to another switch, but before I purchase another switch, I would like to know the type or model of the fiber module so I can confirm if it will be...
Hello I have one 1910 48+4sfp and one 1920 48+sfp manageable switches They are connected by a single cable There is no vlans or anything ..i just want them to act as one switch..lately i am having disconnections .. tried to setup mstp globally but connection was down What should i do ?...
Hi there, due to a tricky wifi problem I have to dump the traffic out, which passed the core switch (HPE 1920-24G-PoE+) to the router. To do so, I added a "Mirroring Group ID" and added the uplink port to the router (GE1/0/24) as "Monitor Port" and set a "Mirror Port" (GE1/0/23) too. You...